Tokmas CID9N65E3 rocks! It is CRAZY how efficient this GaN FET is in TO-252 (DPAK) package. It generates 5W @ 28 MHz with 13.8V at drain without even warming up! Close to 4W @ 50 MHz with 12.0V at drain. 5W+ @ 50 MHz with 13.8V at drain. 11W+ @ 50 MHz with 20V at drain. It even produces ~3W at 70 MHz with 13V at drain - w00t! ...
I recently found two FET gate drivers which are quite fast! Wuxi Maxinmicro MX1025D BD2311NVX-LBE2 ROHM Semiconductor They are perfect for driving the fast Tokmas GaN FETs that we recently discussed on this site. Our 'workhorse' gate driver for the recent experiments has been the Onsemi's NCP81074ADR2G in a friendly SOIC-8 package.
This ~1W to ~5W WSPR beacon runs continuously on the 10m band. It handles extreme environmental temperatures pretty well (it is 42°C plus here). Our article on this beacon's design and operation will appear in the May/June 2025 issue of the QEX magazine soon. References: http://www.carnut.info/WSPR_Tx/WSPR_Tx.htm QEX May-June 2025 TOC QEX May-June 2025 Perspectives ...
Ismo (OH2FTG) recently introduced me to a bunch of Tokmas RF parts. Out of these, the Tokmas CID10N65F GaN FET stood out. It seems to have a lot of potential (for HF + 6m) at a very low price point. This RF MOSFET part can be purchased from LCSC. It seems Tokmas CID10N65F has the potential to completely replace the RD16HHF1 part from Mitsubishi Electric! Datasheet excerpt: The full datasheet is available here. ...
I have designed, built and tested an all-HF WSPR beacon which produces 1W @ 5V and is rugged and cost-effective. Power consumption: Around 420mA @ 5V. Cost: Around 500 INR. Time to build: Less than 30 minutes. The files for this project are published here for personal (non-commercial) usage. For a 5W (QRO) WSPR beacon, please hold on for our upcoming QEX magazine article ;) Special shoutout goes to Brad (K1TE) for always pushing me to do better - thank you! ...
Sometimes we all need a bit of QRO - Life's too short for QRP sometimes. So we give you the Baby-QRO switching amplifier! This Baby-QRO switching RF amplifier design is inspired by the wonderful Single NXP MRF-101 Eval Board project by Jim Veatch. Thank you Jim! Instead of using the expensive MRF101 MOSFET, we use fast SiC MOSFET(s) from Wolfspeed / SUPSiC. 3D render: Schematic: ...